49 Ton Excavator
The mining tycoon, smart-inspiring the future - CARTER CT490-8C 49-ton hydraulic excavator makes a stunning debut
Designed specifically for super-large projects, this excavator redefines the peak of heavy-duty operation efficiency
✅Engine power: 300kW (Cummins engine, perfect balance of strong power and low fuel consumption)
✅Bucket capacity: 2.6m³ (Standard rock bucket, suitable for all scenarios including crushing, excavation and loading)
✅Excavation depth: 7.38 meters (meeting the requirements of deep mining in the mine and the construction of water conservancy hubs)
When the scale of an engineering project is measured in tens of thousands of tons and time is measured in minutes and seconds, efficiency becomes the core factor determining profits and losses. In vast mines, busy ports, and national-level infrastructure construction sites, the requirements for equipment go far beyond "working", but must be "conquering".
The 49-ton hydraulic excavator is precisely the heavy-duty flagship designed for this purpose. It integrates top-notch engineering philosophy, ultimate reliability and forward-looking intelligent technology. It is not merely an excavator, but a strategic asset and profit engine for your large-scale earthwork operations, dedicated to transforming every drop of fuel and every minute of working hours into unparalleled productivity.
Five major application scenarios, all-round competent
Open-pit mine: 2.6m³ rock hopper + 346kN digging force, capable of loading approximately 500 tons of ore per hour. Combined with dump trucks, it can achieve "minute-level loading".
Water conservancy hub: With a excavation depth of 7.38 meters, it meets the construction requirements of dam foundation pits and diversion tunnels, and its efficiency is 40% higher than that of traditional equipment.
Road construction: Intelligent leveling system and automatic slope control, with the construction accuracy of the roadbed controlled within ±2.5cm.
Industrial demolition: An optional 160mm drill rod breaker can be installed, capable of breaking up to 800 cubic meters of reinforced concrete structures in a single day.
Emergency rescue: The maximum climbing slope can reach 70°, the fuel tank capacity is 750L, and it can operate continuously for multiple hours, making it the perfect rescue partner.
| Model | CT490-8C | Model | CT490-8C |
| Operating weight | 49 | G-Tail swing radius (mm) | 4140 |
| Bucket capacity | 2.6 | H-Track ground length(mm) | 4470 |
| Engine model | ISUZU 6WG1XKSC-01 | J-Track length (mm) | 5480 |
| Rated power (kw/r/min) | 300/1800 | K-Track gauge (mm) | 2740 |
| Maximum torque （N*m） | 1 533/1400 | L-Track width (mm) | 3340 |
| Engine displacement（L） | 15.681 | M-Track shoe width (mm) | 600 |
| Max.flow (L/min) | 382*2 | N-Turntable width (mm) | 3060 |
| Working pressure (Mpa) | 31.4/34.3 | O-Max. digging height (mm) | 10725 |
| Fuel tank capacity (L) | 750 | P-Max. dumping height (mm) | 7595 |
| Hydraulic oil tank capacity (L) | 430 | Q-Max. digging depth (mm) | 7385 |
| Travel speed (km/h) | 2.88/4.57 | R-Max. vertical wall digging depth (mm) | 6130 |
| Swing speed (r/min) | 9 | T-Max. digging reach (mm) | 11575 |
| Max. climbing degree (%) | 70 | U-Max. digging reach at ground level (mm) | 11370 |
| Arm digging force | 239 | V-Min. swing radius (mm) | 4825 |
| Bucket digging force (KN) | 346 | X-Distance between center of rotation and tail length (mm) | 4140 |
| Average grounding pressure (Kpa) | 76.3 | Z-Height of counterweight (mm) | 1058 |
| A-Overall length (mm) | 12520 | A1-Ground length (in transportion)(mm) | 7565 |
| B-Overall width (mm) | 3340 | Arm length (mm) | 2900 |
| C-Overall height (to top of boom)(mm) | 3700 | Boom length (mm) | 7060 |
| D-Overall height (to top of cab)(mm) | 3195 | Deflection angle left°/right° | - |
| E-Counterweight ground clearance(mm) | 1315 | Maximum dozing height/depth (mm) | - |
| F-Min. ground clearance (mm) | 550 | Dozer size width/height（mm） | - |
Packing and transportation of excavator
We can provide standard container transportation, bulk transportation, rail transportation and other transportation solutions.
Company Profile
Shandong CARTER Heavy Industry Co., Ltd. was established in 2004 and is one of the earlier enterprises in China engaged in the production of excavators. Companies affiliated with huasheng zhongtian machinery group, huasheng zhongtian machinery group is a has a long history of more than 70 years, large-scale machinery group.Huasheng Zhongtian Machinery Group is a manufacturers of garden machinery and plant protection machinery in China, ranking among the top 500 machinery enterprises in China. It is also a world-class manufacturer of small gasoline engines. Its "KASEI" brand enjoys a global reputation and is a well-known brand in the industry.
Frequently Asked Questions
What is the price of a small excavator? The price of excavators varies due to factors such as configuration and functional options. You can inform us of your needs through the contact information below and we will reply as soon as possible.
How to operate a small excavator?
Operating a small excavator requires professional training. We will provide videos for each model to help you quickly master the operation methods.
Does it support custom configuration? Support. We can customize the product color and functional components according to your requirements.
What are the payment methods and delivery times?Payment will be by T/T and delivery will be made within 30 to 40 days after receipt of advance payment.Is there any discount for bulk purchase? Of course, bulk purchases can enjoy corresponding discounts. For specific details of the offers, please feel free to consult us at any time.
